平面变压器
平面变压器包括多层PCB型、铜箔型和多种绕组组合型,涵盖了各种电源应用。 如DC/DC, AC/DC等;且还可为客户定制各种形式和应用的平面变压器,为客户提供适合的解决方案和产品。 Specifications: •Multilayer PCB For Transformer Winding •High Consistency And Efficiency •Low Profile,High Reliability •Winding Structure : PCB Up To 24 Layers •Typical Efficiency : 95%~99% •Typical Topology : Forward/Flyback/Buck/Full Bridge/Half Bridge
specifications
installation
The Angle
Port number
Built-in transformer
Built-in transformer rate
Transmission rate
Encapsulation type
Port number
The Pin number of feet
POE supported or not
POE power
Operating temperature range
category
Port number
With or without a radiator
Whether there is a light guide
PCB termination method
Description
Shield type
Package type
L(mm)xW (mm)xH
NDUCTANCE(ΜH)
Saturation current(A)
Temperature rise current(A)
Package size
Encapsulation type
power (Watts)
Output voltage
Application type
impedance PRI:SEC
type
Installation mode
SFP rate
SFP gold plating thickness
SFP Nickel plating thickness
High voltage test(Vrms)
Sensible value
Turn ratio(Line:Device)
Audio product size L/W/H(mm)
Topology
Turns Ratio(Pri:Sec:Aux)
Pri Inductance (μH)±25%
LK Inductance Max (μH)
DCR Max (mΩ) Pri./Sec./Aux
HI-Pot (Vrms)
Solution
Speed
CM Impedance (Ω Typ)
Inductance 100KHz/0.1V (μH)Min
product size L/W/H(mm)