共模电感
共模电感是有助于抑制信号、电源或音频线路上的共模噪声的滤波器。它的设计是为了减少和过滤电力系统中的共模噪声。共模电感的关键参数是额定电流(以确保部件在应用中不会过热)、阻抗与频率(以确保其经过优化以衰减所需频率)、隔离电压(以确保其满足线路和中性相之间的板级要求)和安全隔离(以确保其满足最终应用的安全要求)。JWD为以太网、PoE、电力、电信和汽车通信等广泛应用设计和制造高度自动化的产品。解决方案范围从mA到80Arms。提供定制解决方案 。
specifications
installation
The Angle
Port number
Built-in transformer
Built-in transformer rate
Transmission rate
Encapsulation type
Port number
The Pin number of feet
POE supported or not
POE power
Operating temperature range
category
Port number
With or without a radiator
Whether there is a light guide
PCB termination method
Description
Shield type
Package type
L(mm)xW (mm)xH
NDUCTANCE(ΜH)
Saturation current(A)
Temperature rise current(A)
Package size
Encapsulation type
power (Watts)
Output voltage
Application type
impedance PRI:SEC
type
Installation mode
SFP rate
SFP gold plating thickness
SFP Nickel plating thickness
High voltage test(Vrms)
Sensible value
Turn ratio(Line:Device)
Audio product size L/W/H(mm)
Topology
Turns Ratio(Pri:Sec:Aux)
Pri Inductance (μH)±25%
LK Inductance Max (μH)
DCR Max (mΩ) Pri./Sec./Aux
HI-Pot (Vrms)
Solution
Speed
CM Impedance (Ω Typ)
Inductance 100KHz/0.1V (μH)Min
product size L/W/H(mm)